Dimensions (W x D x H)

76 x 81 x 130 cm (30 x 32 x 51 in.)

86 kg (190 lb)

 Power requirements

 (includes compressor)

115 VAC, 60 Hz, 4.2 A or 6.4 A with controller

compartment heater

203 VAC, 50 Hz, 2.7 A or 4.1 A with controller

compartment heater

 Overload protection

115 VAC: 7.5 A circuit breaker

230 VAC: 5.0 A circuit breaker

 Compressor

1/5 HP

115 VAC: 115℃ (239℉) thermal overload protector,

7.1 locked rotor amps

230 VAC: 120℃ (248℉) thermal overload protector,

7.6 A peak start current

 Operating temperature

0 to 50℃ (32 to 122℉); with AC battery backup:

0 to 40℃ (32 to 104℉); with controller compartment

heater: -40 to 50℃ (-40 to 122℉); with controller

compartment heater and AC battery backup: -15 to 40℃

(5 to 104℉)

 Storage temperature

-30 to 60℃ (-22 to 140℉)

 Relative humidity

0 to 95%

 Installation category,

 pollution degree

II, 2

 Protection class

l

 Temperature control

4 (±0.8)℃ (39(±1.5)℉)

[Radio frequency interference in the 30 to 50 MHz range

can cause a maximum temperature change of 1.3℃ (34.3℉). Adjust the set point temperature to 2 to 10℃ (35.6 to 50℉) to correct this interference.]

 Enclosure

IP24, low-density polyethylene with UV inhibitor 

 Sample bottle capacity

 Single bottle: 10 L (2.5 gal) glass or polyethylene, or 21 L (5.5 gal) polyethylene

 Multiple bottles: two 10 L (2.5 gal) polyethylene and/or glass, four 10 L (2.5 gal) polyethylene and/or glass, eight 2.3 L (0.6 gal) polyethylene and/or 1.9 L (0.5 gal) glass, twelve 2 L (0.5 gal) polyethylene (AWRS only), twenty-four 1 L (0.3 gal) polyethylene and/or 350 mL (12 oz.) glass

  Certifications

AC power supply: cETLus, CE